3M™ Multimedia Projector X65 Product Safety Guide
© 3M 2003
7
WARNING (continued)
•
To reduce the risk associated with the hot surface temperatures produced by
the projection lamp, which if not avoided may result in death or serious injury:
-
Never touch the projection lamp or surrounding surfaces while the lamp is still hot.
-
Switch projector “OFF”, remove the power cord from the electrical outlet, and
allow the unit to cool for at least 45 minutes before replacing the lamp.
•
To reduce the risk associated with air or ground water contamination, which if
not avoided could result in death or serious injury:
-
The lamp in this product contains mercuy. Dispose of projection lamp in a manner
that is consistent with your local hazardous waste regulations for mercury.
-
For recycling and disposal information, contact your respective governmental
agencies.
In U.S., contact the Electronic Industries Alliance at www.lamprecycle.org
In Canada, contact the Electronic Product Stewardship Canada at www.epsc.ca
CAUTION
•
To reduce the risk associated with laser radiation, which if not avoided may
result in minor or moderate injury:
-
Never look directly at the laser output of the remote control or point it at other
people.
-
Never attempt to make any adjustments to the internal controls of the remote
control other than those described in the Operator’s Guide.
•
To reduce the risks associated with fire, explosion, chemical leakage, and/or
poisoning, which if not avoided may result in minor or moderate injury and/or
property damage:
-
Use only the specified batteries with this remote control transmitter.
-
Never mix old and new batteries.
-
Use care to orient the plus (+) and minus (-) terminals of the batteries according to
the markings found on the remote control.
-
Use and handle batteries in a manner that avoids damaging them.
-
Keep batteries away from children and pets.
-
Remove the batteries from the remote control when not to be used for an
extended period.
•
To reduce the risk associated with air or ground water contamination, which if
not avoided may result in minor or moderate injury:
-
Dispose of batteries in a manner that is consistent with your local hazardous
waste regulations.
•
To reduce the various risks associated with this product, which if not avoided
may result in minor or moderate injury and/or property damage:
-
Do not expose this projector to direct sunlight, or use it outdoors.
-
Always operate the unit on a flat, sturdy, and horizontal surface.
-
Never operate the unit in a vertical orientation such that the lens points up or down.
-
Do not insert liquids or foreign object. To avoid penetration of foreign objects, do
not put the projector into a case or bag together with anything except the
accessories of projector, signal cables and connectors.
ENGLISH
Содержание Multimedia Projector X65
