background image

3M Company 

3M Separation and Purification 

Sciences Division 

13840 South Lakes Drive

 

Charlotte, North Carolina 28273 

U.S.A.
Phone  +1 980 859 5400 

Web www.3M.com/liqui-cel

Technical Information: 

 The technical information, guidance, and other statements contained in this document or 

otherwise provided by 3M are based upon records, tests, or experience that 3M believes to be reliable, but the accuracy, 

completeness, and representative nature of such information is not guaranteed. Such information is intended for people 

with knowledge and technical skills sufficient to assess and apply their own informed judgment to the information. No 

license under any 3M or third party intellectual property rights is granted or implied with this information.

Product Selection and Use:

  Many factors beyond 3M’s control and uniquely within user’s knowledge and control can 

affect the use and performance of a 3M product in a particular application. As a result, customer is solely responsible 

for evaluating the product and determining whether it is appropriate and suitable for customer’s application, including 

conducting a workplace hazard assessment and reviewing all applicable regulations and standards (e.g., OSHA, ANSI, 

etc.). Failure to properly evaluate, select, and use a 3M product and appropriate safety products, or to meet all applicable 

safety regulations, may result in injury, sickness, death, and/or harm to property.

Limited Warranty, Limited Remedy, and Disclaimer:

  Unless a different warranty is expressly identified on the applicable 

3M product literature or packaging (in which case such express warranty governs), 3M warrants that each 3M product 

meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES 

OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR 

CONDITION OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ARISING OUT OF A COURSE 

OF DEALING, CUSTOM, OR USAGE OF TRADE. If a 3M product does not conform to this warranty, then the sole and 

exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.

Limitation of Liability:

  Except for the limited remedy stated above, and except to the extent prohibited by law, 3M 

will not be liable for any loss or damage arising from or related to the 3M product, whether direct, indirect, special, 

incidental, or consequential (including, but not limited to, lost profits or business opportunity), regardless of the legal or 

equitable theory asserted, including, but not limited to, warranty, contract, negligence, or strict liability

3M Deutschland GmbH

3M Separation and Purification 

Sciences Division

Öhder Straße 28 

42289 Wuppertal, Germany

Phone: +49 202 6099-0

© 3M 2022. All rights reserved. 3M and Liqui-Cel 

are trademarks of 3M Company. Please recycle.

REV 10-2022

Содержание Liqui-Cel EXF-14 28 Series












Отзывы: