3M Liqui-Cel EXF-10x28 Series Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 12

3M Liqui-Cel EXF-10x28 Series Скачать руководство пользователя страница 12

LC-1088

Rev. 04/2021

3M.com/Liqui-Cel

Technical Information:

The technical information, guidance, and other statements contained in this document or otherwise provided by 3M are based upon records, tests, or

experience that 3M believes to be reliable, but the accuracy, completeness, and representative nature of such information is not guaranteed. Such information is intended for

people with knowledge and technical skills sufficient to assess and apply their own informed judgment to the information. No license under any 3M or third party intellectual

property rights is granted or implied with this information.

Product Selection and Use:

Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a

particular application. As a result, customer is solely responsible for evaluating the product and determining whether it is appropriate and suitable for customer’s application,

including conducting a workplace hazard assessment and reviewing all applicable regulations and standards (e.g., OSHA, ANSI, etc.). Failure to properly evaluate, select, and

use a 3M product and appropriate safety products, or to meet all applicable safety regulations, may result in injury, sickness, death, and/or harm to property.

Warranty, Limited Remedy, and Disclaimer:

Unless a different warranty is specifically stated on the applicable 3M product packaging or product literature (in which case

such warranty governs), 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER

WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY,

FITNESS FOR A PARTICULAR PURPOSE, OR ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. If a 3M product does not conform to this

warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.

Limitation of Liability:

Except for the limited remedy stated above, and except to the extent prohibited by law, 3M will not be liable for any loss or damage arising from or

related to the 3M product, whether direct, indirect, special, incidental, or consequential (including, but not limited to, lost profits or business opportunity), regardless of the

legal or equitable theory asserted, including, but not limited to, warranty, contract, negligence, or strict liability.

3M and Liqui-Cel are trademarks of 3M Company. All other trademarks are the property of their respective owners. © 2021 3M Company. All rights reserved.

3M Deutschland GmbH

3M Separation and Purification

Sciences Division

Öhder Straße 28

42289 Wuppertal Germany

Phone: +49 202 6099 - 0

3M Company

3M Separation and Purification

Sciences Division

13840 South Lakes Drive

Charlotte, North Carolina 28273

USA

Phone: +1 980 859 5400

«
...
10
11
12

Содержание Liqui-Cel EXF-10x28 Series













Отзывы:

Нет отзывов