11
When dry, apply glue to bottom edge and
side of part (15) and to the bottom and ends
of part (16). Slot assembly into ground
plane.
Apply glue to the notch in part 15 that fits
with part 16.
12
Rear view of model as per stage 11.
13
Apply glue to edges of part (17) and top
edges of parts (14) and (15) and position
part (17) as shown. Hold in place with tape
if using PVA.
14
Apply glue to the tabs on part (9) and
position in place. Wipe off any excess glue
with wet brush .
4 of 25
