7
Apply glue to the top of the sidewalls and
the recesses in the top of the front and rear
walls of the annex. Apply glue to the sides of
part (8) and position in place.
If you are
using PVA,
wipe off any access glue and
secure with tape while glue cures.
8
Apply glue to bottom edges and tabs of (14)
and position in place on the ground plane.
9
Apply glue to bottom edges and tabs of (13)
and position in place on the ground plane.
10
Apply glue to bottom edge of part (15) and
slot into part (16). If using PVA hold in
place with rubber band or tape while glue
cures
3 of 25
