3
Press part 3 out of part 25.
4
Peel the backing off the bottom of
acrylic block (3). Position on ground
plane as indicated. Press down firmly
5
Apply glue to the interlocking tabs and
along the bottom of part (4) and
position in place. Apply glue to the
back of the interlocking tabs and along
the bottom of part (5) and position in
place.
6
Apply glue to the tabs on part (6) and
position in place. Apply glue to the rear
of the interlocking tabs of part (7) and
to the tab that slots into the ground
plane, slot into place. If you are using
PVA, wipe off any excess glue from
joints with wet brush and use a rubber
band or tape to hold the structure
together while glue cures.
2 of 25
