![background image](http://html1.mh-extra.com/html/3m/g5/g5_operating-instructions-manual_442606019.webp)
Configuration
3M™ Drive-Thru Systems Model G5 and Model XT-1
Operating Instructions
November 6 2014 – Revision 2.1
Page 19 of 77
•
Enter the base station configuration mode, see page 11.
•
Select
04 Registration
>
2 Remove Headsets
.
•
Scroll to the number of the headset you want to un-register.
•
Press
Enter
.
Note:
If you do not know or have access to the number of the headset to be un-
registered, identify the headsets that you want to remain in service and un-
register any that remain on the list.
List All Headsets
To see a list of the registered headsets:
•
Enter the base station configuration mode, see page 11.
•
Select
04 Registration
>
3 List All Headsets
.
Resetting Inactive Days
For any headset, you can manually reset its number of inactive days to zero (see
“Change Self Monitoring” on page 27 for information about the inactive days
timer.
To reset the inactive days:
•
Enter the base station configuration mode, see page 11.
•
Navigate to
08 Headset Setup
>
Currently Editing Headset
.
•
Press
⊳
or
if necessary to scroll to the headset ID number for the
headset you want to reset.
•
Select
<CLEAR>
.
Checking Headset Software Revision
To check the software revision number for a headset:
•
Enter the base station configuration mode, see page 11.
•
Navigate to
08 Headset Setup
>
Currently Editing Headset
.
•
Press
⊳
or
if necessary to scroll through the headsets. The software
version appears below the headset ID number.
Change Noise Reduction Level
There are several ways to improve the sound quality at the headset using the
following settings.
Inbound Microphone Noise Reduction Level
The inbound microphone noise reduction level setting reduces background noise
to make it easier to hear speech at the customer order point.
Perform the following steps to increase or decrease the noise reduction level.
•
Enter the base station configuration mode, see page 11.
•
Make a new selection for
05 Noise Reduction
>
Inbound Mic
Noise Reduction Level
. Options are
Off
,
Min
,
Low
,
Med
,
Hi
, and
Max
. You may need to experiment for a setting that works best for
your ambient noise environment.
Содержание G5
Страница 1: ...3M Drive Thru Systems Model G5 and Model XT 1 Operating Instructions ...
Страница 30: ......