Program
•
Select HEAT with the HEAT/Cool MODE switch.
•
To select the
DAY
you want to program
: Press
PROGRAM
to enter
programming mode. The
PROGRAM
icon will come on. The day icon will show
SU
(Sunday). Press
day
again to advance the day selection.
•
Select the TIME SLOT you want to program:
To change the TIME SLOT
(
MORN, DAY, EVEN, NITE
) press the
NEXT
button. The display will cycle
through the time periods in sequence. Select
MORN.
•
Select the desired temperature for that TIME SLOT :
To change the
temperature for that TIME SLOT press the TEMP +/- buttons.
•
Select the time of day you want that TIME SLOT to represent:
To set the time when
MORN
will begin , press the
<TIME
or
TIME>
buttons
to move the set point forward or backward in time.
•
Select the next TIME SLOT and program temp and time:
Press
NEXT>
the display will show
DAY
. Repeat setting temp and time.
Select the remaining TIME SLOT's,
EVEN
and
NITE.
Program their temp and
time info. Repeat the above procedures for each day of the week.
Push
DAY>
button to cycle through the days.
To
COPY
the program of the current day to another day, press COPY
program once. COPY will display on the LCD. The day icon for the source
day will go solid and the day icon for the destination day will flash. Use day
button to select the destination day. Press COPY again to confirm the copy.
If you decide you don't want to copy, press HOME to exit.
NOTE:
60 Second Rule-During
programming, if a button is not
pushed within 60 seconds, the unit will go out of the set mode.
Everything you have input in this programming will automatically be saved.
NEXT
NEXT
DAY
DAY
PG
4
PG
5
TIME
TIME
