PROG 2
: An alternative program can be used for holidays, shift work, etc.
Access by pushing the
PROG 2
button.
PROG 2
will then be active until you
shut it off by touching the
PROG 2
button again. The main program will then
again be active. To change
PROG 2
press
DAY
until
PROG 2
is displayed
and repeat the programming procedure.
•When finished with your custom program, either wait 60 sec or press HOME
to save and run your program.
To program for
COOL
, select COOL with the Heat/Cool MODE switch and
repeat the above procedure.
To
REVIEW
the program you have entered:Press PROGRAM once to enter
programming mode.Then press
FILTER/REVIEW
once.
The display will cycle through the programmed times and temps, showing
each program for 12 seconds. Starting from Sunday;
MORN
and ending on
Saturday;
NITE
. The programmed temperature is shown on the left of the
LCD, the programmed time, day and time slot are shown on the right and the
right top of the LCD respectfully.
•Press HOME to leave program REVIEW mode and run the program.
Program cont.
DAY
SWING
setting determines the temperature
difference from ON to OFF that the 3M-22 will command the HVAC system to run.
• With the MODE switch in HEAT or COOL, press the button.
• The
SWING
icon is displayed. The current setting of temp swing is shown on the
display (default at .5
o
F).
To change the swing, push or buttons. The furnace will cycle
more at the lower numbers as it tries to keep your set point constant.
To complete the swing setting, push the
HOME
button.
TIME
Special Features - Swing
PG
6
PG
7
TIME
TIME
