3M DFS 700, Инструкция по установке и эксплуатации

Страница: 37 / 89

Technical Information DFS 700 / 04.2009
6-9
Figure 6-7 Path for Data Folder and Language selection
For the first installation the suggested data folder should be accepted because example
data sets have been placed in it. The directory can be changed at any time
(6) If necessary the program can be uninstalled again by choosing “Settings”, “Control
Panel”, then “Software” and then following the uninstall instructions.
6.4.2 Install USB-device driver for DFS 700
For the DFS 700 to communicate with the PC, the USB-driver for the DFS 700 must be
installed on the PC. The driver is also on the DFS-CAS program CD.
(1) Insert the program CD in the drive - the Setup program will start automatically.
(2) Install “Install USB-Driver“ or select “Start” then “Run” from the Windows taskbar and
enter the path to the CD ROM drive and the program start file, e.g. “d:\USB\PDInst.exe”
in the “Run” window.
(3) Click “OK” to confirm. The USB-driver is installed, in doing so follow the installation
instructions and, when asked, connect the DFS, which needs to be switched on.
Alternatively, the USB-driver can be installed using the "Assistant for searching new
Hardware", which should start automatically in Windows after the DFS is connected to
the PC with the USB-cable. Thereby, follow the instructions and specify the drive
containing the Program CD as the search location for the USB-driver. Questions
regarding the type of the new hardware should be answered with "Com-Port".
english