3M DBI SALA 2108406, Руководство пользователя

Страница: 6 / 20

6
;
Prior to installation and use of this equipment, record the product identification information from the ID label in the
Inspection and Maintenance Log (Table 2) at the back of this manual.
PRODUCT DESCRIPTION:
Figure 1 Illustrates the 3M™ DBI-SALA™ Fixed Beam Anchor. The Fixed Beam Anchor is a single point anchorage connector for a
personal fall arrest system or personal fall restraint system designed to be attached to a beam. The Fixed Beam Anchor may be
used as an end termination for 3M Fall Protection approved horizontal lifeline systems.
Figure 2 Illustrates components of the Fixed Beam Anchor. See Table 1 for Component Specifications. The Fixed Beam Anchor is
comprised of a notched Support Tube (A) with a Fixed Hook End (D) and an Adjustable Hook End (E) that hook over the opposite
eges of a beam flange. The Swiveling Connector Ring (B) serves as the tie-off point for a Lanyard or Self-Retracting Device
(SRD), with a Pin (C) holding the Connector Ring in place. The Detent Pin (F) is used to lock the Adjustable Hook End. The
Adjustment Handle (G) is used to tighten or loosen the Adjustable Hook End on the beam flange. A Bolt (H) and Nut (I) hold the
Fixed Hook End together. The Key Ring (J) keeps the RFID Tag (K) and Labels (L) of the Fixed Beam Anchor.
Table 1 – Specifications
System Specifications:
Capacity : One person with a combined weight (clothing, tools, etc.) of no more than 310 lbs (140 kg) for ANSI,
420 lbs (191 kg) for OSHA.
Standards: See Figure 1 for the applicable standards of each Fixed Beam Anchor model.
Anchorage/
Structure:
Structure must meet dimensional requirements from Figure 1. Anchorage strength must comply with
Section 2.1 requirements.
Service
Temperature
-40°F (-40°C)
Minimum Service Temperature
Breaking
Strength:
5,000 lbs (22.2 kN)
Minimum Breaking Strength
Dimensions: See Figure 1 for the dimensions of each Fixed Beam Anchor model.
Weight: See Figure 1 for the weight of each Fixed Beam Anchor model.
Component Specifications:
Figure 2
Reference Component Materials
A Support Tube Alloy steel
B Swiveling Connector Ring Alloy steel
C Pin Alloy steel
D Fixed Hook End Aluminum
E Adjustable Hook End Aluminum
F Detent Pin Stainless steel
G Adjustment Handle Aluminum
H Bolt Zinc plated steel
I Nut Zinc plated steel
J Key Ring Zinc plated steel
K RFID Tag Nylon
L Labels Vinyl