78-0015-0557-3-B
6
3.4
Group the aramid yarn together. Run your fingers
over the yarn at least twice .
3.5
Place the cable into the cable holder, with fiber curl downward. Place 3 mm cable straight down the center track.
Place 1.6–2 mm cable in an s-bend, using the far-side track on the cable holder. Align the beginning of the cable
slit with the 2 posts at the beginning of the cable track.
3.6
Close the back lid until it latches shut.
3.7
Arrange the slit jacket along the sides of the cable
holder. Pull the aramid yarn into the center of the
back lid. Close the front and middle lid.
3 mm cable
1.6–2 mm cable
click
s-bend
1. slit jacket
2. yarn
press
press
1. slit jacket
3. close lids
cable slit, aligned
with 2 posts
cable slit, aligned
with 2 posts
