wipe jig tip with vertical motion
78-0015-0557-3-B
4
1.3 Additional materials needed:
•De-ionized or distilled water for nano-finishing at
above-freezing temperatures
•25% to 35% methanol and 75% to 65% de-ionized
or distilled water (by volume) solution for nano-
finishing at below-freezing temperatures. DO
NOT use ethanol or isopopyl alcohol for nano-
finishing.
•99% pure isopropyl alcohol (for cleaning only) or
a fiber optic connector cleaning solution approved
by your company.
Note: Carefully follow safety health, and environmental
information given on product labels or the Material
Safety Data Sheets for isopropyl alcohol, fiber optic
cleaning fluid, and/or methanol/water solution.
1.4
Optional accessory:
3M™ 200X View Scope 6365-VS. DO NOT use
when connectors are illuminated by a laser source.
2.0 Connector and Protrusion Setting Tool Preparation
2.1 CRITICAL STEP: Slide the boot onto the cable
being terminated.
2.2
On the 3M™ Protrusion Setting Tool, move the actuator lever to the unactivated position as shown. Clean the tip
of the protrusion setting jig using a lint-free cleaning swab with a drop of alcohol or cleaning fluid. Reach through
the window with the swab and move the swab tip vertically to clean the jig tip.
1
2
