3M ChassisTouch 15, Руководство по установке пользователя

Страница: 16 / 32

16 ChassisTouch FPD Monitors Installation Guide
3M Touch Systems Proprietary Information
Access to the Video Controls
The controls for adjusting the video display are located on the back of
the ChassisTouch monitor. These buttons let you display the on-screen
menu and adjust the phase, image position, contrast, and brightness.
Make sure you will be able to access the video controls once the
ChassisTouch monitor is installed.
Clearance and Ventilation
Leave at least two inches of clearance space behind the ChassisTouch
monitor for proper ventilation. Always maintain adequate ventilation to
protect the display from overheating and to ensure reliable and
continued operation.
Securing and Routing System Cables
You must be sure to secure all cable connections. Shaking and
vibration, especially during shipment, may dislodge components that are
improperly connected.
•
Be sure to tighten all cable screws.
•
Use the cable tie and cable mount supplied in the ChassisTouch
hardware kit to secure the power supply cable.
•
Route all wiring and cabling away from heat sources and sharp
metal edges to avoid damage. Also, keep the touch screen cable
away from sources of electromagnetic and radio frequency
interference.
Use the cable tie and
mount to secure the
power cable