6
THESE RESPIRATORS ARE APPROVED ONLY IN THE FOLLOWING CONFIGURATIONS:
TC-
PROTECTION
1
9210
9211
1870
8670F
8671F
CAUTIONS AND
LIMITATIONS
2
84A-2669
N95
X
ABCJMNOP
84A-2668
N95
X
ABCJMNOP
84A-3844
N95
X
ABCJMNOP
84A-4516
N95
X
ABCJMNOP
84A-4517
N95
X
ABCJMNOP
1. PROTECTION
Rev. F: 10-18-07
RESPIRATOR COMPONENTS
FILTERING FACEPIECE
3M
St. Paul, Minnesota, USA
1-800-243-4630
9210 Type Respirators
2. CAUTIONS AND LIMITATIONS
A - Not f or use in atmospheres containing less than 19.5 percent oxygen.
B - Not f or use in atmospheres immediately dangerous to lif e or health.
C - Do not exceed maximum use concentrations established by regulatory standards.
J - Failure to properly use and maintain this product could result in injury or death.
M - All approved respirators shall be selected, f itted, used and maintained in accordance with MSHA,
OSHA and other applicable regulations.
N - never substitute, modif y, add, or omit parts. Use only exact replacement parts in the conf iguration
as specif ied by the manuf acturer.
O - Ref er to User's Instructions, and / or maintenance manuals f or inf ormation on use and maintenance
of these respirators.
P - NIOSH does not evaluate respirators f or use as surgical masks.
N95 - Particulate Filter
(95% f ilter ef f iciency level) ef f ective against
particulate aerosols f ree of oil; time use restrictions may apply.
This respirator contains no components made from natural rubber latex.
FOR MORE INFORMATION
In United States, contact:
Internet: www.3M.com/occsafety
Technical Assistance: 1-800-243-4630
For other 3M products:
1-800-3M-HELPS or 1-651-737-6501
3M Occupational Health and
Environmental Safety Division
3M Center, Building 0235-02-W-70
St. Paul, MN 55144-1000
© 2011 3M Company
98-0060-0096-6/2
