3M 718 Скачать руководство пользователя страница 12

Electronic and Interconnect Solutions Division 

6801 River Place Blvd.
Austin, TX 78726-9000
www.3m.com/eisd

3

Important Notice:

All statements, technical information, 
and recommendations related to 3M’s
products are based on information 
believed to be reliable, but the accuracy 
or completeness is not guaranteed. Before
using this product, you must evaluate it and
determine if it is suitable for your intended
application.You assume all risks and
liability associated with such use. Any
statements related to the product which is
not contained in 3M’s current publications,
or any contrary statements contained on
your purchase order shall have no force 
or effect unless expressly agreed upon, 
in writing, by an authorized officer of 3M. 

Warranty; Limited Remedy; Limited
Liability.

This product will be free from defects 
in material and manufacture for a period 
of one year from the time of purchase. 

3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO,
ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS 
FOR A PARTICULAR PURPOSE.

If this product is defective within the
warranty period stated above, your
exclusive remedy shall be, at 3M’s option,
to replace or repair the 3M product or
refund the purchase price of the 3M
product. 

Except where prohibited by 

law, 3M will not be liable for any indirect,
special, incidental or consequential loss
or damage arising from this 3M product,
regardless of the legal theory asserted.

Litho in USA

© 3M 2002

34-7051-6227-8

Recycled paper
40% pre-consumer waste paper
10% post-consumer waste paper

Содержание 718













Отзывы: