3M 4604, Инструкция по эксплуатации

Страница: 11 / 16

11
8.11 Remove cardboard insert and pull core tail through the center of
PST until core is even with PST edge.
8.10 Place base plate as illustrated between the cables on top of the
end seal with the outside ribs facing upward.
Note: In order to fit 600 pair or larger cable, it may be necessary
to pull the cables together with tape or cable ties.
8.9 Cut off top of foil bag which contains desiccant at dotted line and
secure bag at base of wire work area with a cable tie.
Note: Carefully follow health, safety and environmental
information given on product label or Material Data Sheet
for desiccant bag.
8.6 Remove packaging from gel sealant strip.
8.7 Wrap the gel sealant strip around the core and ground wraps with
a slight tension.
8.8 Squeeze gel end seal to insure a seal between layers and cables.
Note: Closure assembly must rest on end seal when placed over
the splice. Move end seal upward, if necessary.
Ribs