3M 3M-Matic 8000a Скачать руководство пользователя страница 138

Страница: 138 / 176

NA - ENG

April 2016

3M-Matic

™

Accuglide 3 - 3 Inch Taping Head

Page 4

(Important Safeguards

continued

on next page)

Explanation of Signal Word and Possible Consequences

Indicates a potentially hazardous situation, which,
if not avoided, may result in minor or moderate injury
and/or property damage.

Indicates a potentially hazardous situation, which, if not
avoided, could result in death or serious injury and/or
property damage.

This safety alert symbol identi

es important messages in this

manual. READ AND UNDERSTAND THEM BEFORE INSTALLING OR
OPERATING THIS EQUIPMENT.

Caution

Warning

• To reduce the risk associated with
mechanical

hazards

Read, understand and follow all safety

and operating instructions before

operating or servicing the case sealer

−

Allow only properly trained and

quali

ed personnel to operate

and or service this equipment

CAUTION

• To reduce the risk associated with

muscle

strain:

Use proper body mechanics when

removing or installing taping heads

that are moderately heavy or may be
considered awkward to lift

• To reduce the risk associated with

impact

hazards

Place the taping head on a smooth

level surface when maintaining or

servicing

this

equipment

WARNING

• To reduce the risk associated with sharp

blade hazards:

- Keep hands and fi ngers away from tape

cutoff blades under orange blade guards.
The blades are extremely sharp.

WARNING

• To reduce the risk associated with
shear, pinch, and entanglement hazards

- Turn air and electrical supplies o

on associated equipment before

  performing any adjustments, mainte-
  nance, or servicing the taping heads
-  Never attempt to work on the taping

head or load tape while the box drive

system is running

WARNING

Important Safeguards

Содержание 3M-Matic 8000a

















































































































































































Результаты поиска

Содержание 3M-Matic 8000a

Отзывы:

Бренды по названию

Популярные бренды

3M 3M-Matic 8000a, Инструкция и перечень запасных частей

Результаты поиска

Содержание 3M-Matic 8000a

Отзывы:

Бренды по названию

Популярные бренды