3M 2178-L Series Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 16

background image

16

Important Notice

All statements, technical information and recommendations related to the Seller's products are based on information believed to be
reliable, but the accuracy or completeness thereof is not guaranteed. Before utilizing the product, the user should determine the suitability
of the product for its intended use. The user assumes all risks and liability whatsoever in connection with such use.

Any statements or recommendations of the Seller which are not contained in the Seller's current publications shall have no force or effect
unless contained in an agreement signed by an authorized officer of the Seller. The statements contained herein are made in lieu of all
warranties, expressed or implied, including but not limited to the implied warranties of merchantability and fitness for a particular purpose
which warranties are hereby expressly disclaimed.

SELLER SHALL NOT BE LIABLE TO THE USER OR ANY OTHER PERSON UNDER ANY LEGAL THEORY, INCLUDING BUT NOT
LIMITED TO NEGLIGENCE OR STRICT LIABILITY, FOR ANY INJURY OR FOR ANY DIRECT OR CONSEQUENTIAL DAMAGES
SUSTAINED OR INCURRED BY REASON OF THE USE OF ANY OF THE SELLER'S PRODUCTS THAT WERE DEFECTIVE.

Telecom Systems Division
6801 River Place Blvd.
Austin, TX 78726-9000
800/426-8688
http://www.mmm.com/telecom

Printed in USA

© 3M 1997 34-7041-9949-5-A

Printed on 50% recycled paper
with 10% post-consumer

«
...
14
15
16

Содержание 2178-L Series

















Отзывы:

Нет отзывов

Похожие инструкции для 2178-L Series

Бренд: ABB Страницы: 85

Бренд: KegLand Страницы: 23

Бренд: Woodward Страницы: 62

Бренд: MIMAKI Страницы: 44

Бренд: Mecc Alte spa Страницы: 34

Бренд: Facom Страницы: 4

Бренд: Azbil Страницы: 2

Бренд: EMKO Страницы: 22

Бренд: 4B Страницы: 28

Бренд: AXIOMTEK Страницы: 2

Бренд: ideal-tek Страницы: 7

Бренд: Grizzly Страницы: 44

Бренд: Smart Dedicated Design Страницы: 6

Бренд: Cole Parmer Страницы: 20

Бренд: Eaton Страницы: 2

Бренд: York Страницы: 24

Бренд: Commell Страницы: 33

GRASPRESSO GP50-15

Бренд: GRAVEDA Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды