3i Corporation Pegasus NX, Руководство по установке

Страница: 15 / 49

11
Built-in dual sim card holder. The dual sim card
holder allows you to insert two sim cards. You can
use two sim cards from the same or different
service providers (s).
Uses cryptographic data transmission by AES
(Rijndael) 128/256 bits encryption, and thus
secures your data from spying.
Can be used as the first or second communication
channel for any alarm panel that follows Amdeco
Contact ID Protocol. Generally, the device waits
for events from alarm panel. If events are
received, the device validates the event by
checking its
Message Type, Event Qualifier and
CRC . If events are valid, then the device operates
in two types of communication mode: 1st
communication path and 2nd communication
path.
Built-in the SMS ECO feature. You can send a
blank SMS to the offine device using the
configured phone number to check if it is
operative or not. The device reverts back with an
ECO SMS related to its current status.
Sample ECO SMS
PEGASUS NX INF: PEGASUS OFFLINE, CURRENT
INTERFACE: GPRS, PHONE LINE: CUT OFF, PNR:
PRESEND, GSM SIGNAL: 26, JAMMER: OPERATIVE,
ETH LINK: DOWN, WIFI: SSID CONNECTED
Supports Wi-Fi and thus acts as a wireless alarm
panel communicator. The Wi-Fi competence is
one of the revolutionary features incorporated in
the device. Here, Wi-Fi is incorporated to give you
an wireless communication option for having a
security system monitored by a central station.
Allows the modification of its configuration and
upgrade of its firmware (software) remotely via
Internet. The remote configuration update allows
the device to function accurately and helps to fix
bugs that were present in the previous version. It
also adds new features and updates.
Eliminates long distance phone call expenses,
and thus acts as an inexpensive cost saving
resource. The monitored client can be anywhere
in the world and is never going to suffer due to
increase in the communication expenditures.
Have two ways out that can be controlled
remotely, and thus makes it possible to Arm and
Disarm the alarm panel without using the
telephone line, depending on the resource being
available on different alarm panels.
Built-in a tamper switch which helps in tamper
detection. The tamper switch is connected to a
digital input configured to generate an interrupt
every time its status changes. The unauthorized
opening of the cover of the device results in the
tamper switch output.
Can work efficiently with both fixed/static or
dynamic IP (DHCP) addressing. Fixed/Static IP
addressing is for one customer on one IP
address, whereas the Dynamic IP addressing
assigns a different IP address each time the ISP
customer logs on to their system.
Built-in a battery compartment containing a 3.7V
Lithium-Polymer 2000mAh rechargeable battery
which provides power to the device in absence of
the main power supply.
Can withstand double monitoring. You can
configure both the Primary and Secondary
Zeus™ Server settings using the Pegasus™
Studio - Configuration Tool.