Left Side Panels
The installation of the left side panels is possible because the left side aluminum braces have
already been loosened. Other braces may need to loosened, though, in order to insert both the
upper and lower left side panels.
1. Installing Left Bottom Panel
The left bottom panel is unique because it has a cutout to insert the power supply
cable in the bottom left corner. The power supply cable should have been removed
before starting the installation. Slide the loosened vertical 20x20 panel out of the way
so there is enough room to slide the panel into place. You may have to loosen or
remove other parts of the braces to make it fit both horizontally and vertically.
Do not
confuse this panel with the one for the opposite side, which has a square hole for
the USB port.
They are similar but not identical.
Bottom Left Side Panel Outline
The bottom of this panel will rest near the screws holding the bottom melamine (R1) or
aluminum (R2) bottom plate. Depending on how the horizontal 20x20 brace is located
there will either be room for the panel to sit on top of the screws, OR to either side with
a slight bend.
Copyright 2018 3DUpfitters
8
