manualshive.com logo in svg

3DR Solo S110A, Руководство пользователя

Поделиться
Скачать
3DR Solo S110A Скачать руководство пользователя страница 20

15

3  The Solo Gimbal

The optional Solo Gimbal holds your GoPro® camera and lets you control it remotely. It taps Solo’s intelligence to 
get perfectly automated shots, plus rock-solid footage, GoPro® control and charging, and long-range HD video 
feed. With the 3-Axis Solo Gimbal, you get:

• 

Smooth and fluid HD footage every flight. 

• 

Start and stop recording (HERO4 models) while you fly so you can pick and choose the shots you want.

• 

Footage stabilized to within 0.1 degree of pointing accuracy for enhanced Smart Shots.

• 

Fine-grain camera tilt control, including angle presets and instant speed adjustment.  

3.1  In the Box

The Solo 3-Axis Gimbal package includes the Solo Gimbal, the sunshade, four balance weights for the GoPro® 
camera, and a screwdriver for installing the Gimbal. 

Figure 3.1.1: Solo Gimbal Parts

To install the Solo Gimbal and start utilizing its features, follow these Solo Gimbal installation instructions:

3.2  Gimbal Installation

Before installing the Solo Gimbal, make sure the firmware on Solo and your GoPro as well as the Solo App on your 
mobile device are up to date for the best performance.

Recommended versions:

•  Solo: 1.2.0 or greater
•  Solo App: 1.2.0 or greater
•  GoPro: 3.00.00 or greater

Balance weights (4)

Solo Gimbal

Sunshade

Screwdriver

Содержание Solo S110A







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды