3Doodler Creater, Руководство пользователя

Страница: 9 / 21

7
HI
LO
OFF
x1
x1
Step 7: Let’s Switch to PLA Plastic!
BLUE
Light
PLA Plastic
With Pen on HI , load a new
strand of PLA Plastic into
Plastic Loading Port . Use a
different color to the
ABS you
were using before.
HI
LO
OFF
PLA Plastic
ABS Plastic
The color of the Plastic will
change once the PLA starts
extruding. It will appear mixed
at first.
STOP extrusion by
pushing either button once.
Clockwise
Push the Plastic through the
back of Pen and click the SLOW
button once. Push and turn the
Plastic clockwise if needed,
until Plastic starts to pull
through on its own.
x1
SLOW
SLOW
FAST
Light to RED
Light to GREEN
Click FAST or SLOW once to
continue extruding the PLA
Plastic and Doodle as you wish.
Switch Pen to LO setting. Wait
for Light to turn GREEN .
HI
LO
OFF
Step 8: Power Down
Remove all Plastic from the
Pen using the Reverse feature
(double click any Speed
Button ). Friendly reminder to
snip those ends!
Move the Control Switch
to OFF .
Allow your 3Doodler to cool
completely before storing.
We recommend powering down and giving your 3Doodler a
30 minutes break after every 2 hours of continuous use.
After 5 minutes of inactivity, the 3Doodler’s heating system will
automatically power down. You will need to press one of the
Speed Buttons OR toggle the Control Switch OFF and then ON
again to continue use.
NOTE:
TAKE A BREAK:
Power Adapter
x2
1
3
5
2
4
1
3
2