3Doodler Creater, Руководство пользователя

Страница: 8 / 21

6
Eiffel tower - P.13-15
Step 6: Reverse and Remove
Plastic
Once Plastic stops reversing,
it is safe to remove it from the
Pen by gently pulling on the
back of the strand.
BLUE Light
With Pen set to HI , wait for
BLUE Light to come on.
HI
LO
OFF
Double click either Speed
Button. Light
will start flashing
to signal Plastic reversing.
x2
Flashing
BLUE
5.3
inches
Plastic that is shorter than 5.3 inches cannot be reversed.
You should feed it all the way through your 3Doodler and use
it up. (Alternatively, you can push Plastic out the back - see
Section 3, Step 3B.)
NOTE:
Before we continue, it’s time you learned about the different
types of Plastic you can use with the 3Doodler (and which
settings to use for each type).
ABS (MATTE):
Temp: HI Temp
Light: BLUE
Feature: Great for drawing in the air.
How to tell: Plastic has white
semi-circle ends.
PLA (GLOSSY / CLEAR /
METALLIC / SPARKLE ):
Temp: LO Temp
Light: GREEN
Feature: Eco-friendly and glossy,
making it perfect for artistic creations.
How to tell: Very rigid, no white
semi-circle ends.
Now that you’ve Doodled with ABS Plastic, we want
to show you everything you need to know about
changing Plastic and introduce you to the different
types of Plastic.
FLEXY:
Temp: HI Temp
Light: BLUE
Feature:
Make flexible,
bendable Doodles.
How to tell:
Plastic is very flexible.
HI
LO
OFF
HI
LO
OFF
HI
LO
OFF
After removing a Plastic strand
from the 3Doodler , cut and
remove any partially melted
material at the end of your
strand before re-feeding it into
the
3Doodler . This will reduce
blockages and clogging issues.
SNIP THOSE ENDS! TIP
PLASTIC TYPES AND SETTINGS. TIP
1
3
2