3Dlabs Wildcat4 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 50

background image

Software Configuration

NOTE:

If setup is not able to find 3ds max in the system registry, it will not install the
driver and will exit. Consult your 3ds max application's documentation to verify
that the application is installed correctly. The driver setup program will only install
for a registered application.

Verify the Default Video Display Driver

Verifying under Windows 2000

1. From the Windows Start menu, go to Settings/Control Panel/Device Manager.
2. Under Display Adapters, verify that two Wildcat devices are listed. This indicates that the

appropriate driver is installed.

NOTE:

If only one Wildcat4 device is listed, you may not have completed installation.
Refer to “

Installing the Driver Software”

for instructions.

3. Click Cancel to close the Display Properties dialog box.

Verifying under Windows XP

1. From the Windows Start menu, go to Control Panel/Performance and Maintenance/ System

Hardware/ Device Manager.

2. Under Display Adapters, verify that two Wildcat devices are listed. This indicates that the

appropriate driver is installed.

NOTE:

If only one Wildcat4 7210 device device is listed, you may not have completed
installation. Refer to “

Installing the Driver Software”

for instructions.

3. Click Cancel to close the Display Properties dialog box.

Verify the System Startup Version

Verifying under Windows 2000

1.  From the operating system Start menu, go to Settings/Control Panel/System/Advanced.
2.  Click Startup and Recovery.
3.  On the Startup and Recovery dialog box, verify that "Microsoft Windows 2000

Professional" is the listed as the Default operating system. It is IMPORTANT that your
operating system matches the driver you installed. Click OK.

4. Click OK again to close the System Properties dialog box.

3Dlabs Graphics Accelerator Card User's Guide

14

«
...
16
17
18
19
20
...
»

Содержание Wildcat4



















































Отзывы:

Нет отзывов

Похожие инструкции для Wildcat4

Бренд: X Rocker Страницы: 5

Бренд: Blaupunkt Страницы: 20

Бренд: XOVision Страницы: 26

Бренд: Gigabyte Страницы: 40

Бренд: Xtrons Страницы: 18

Бренд: Racelogic Страницы: 2

WinFast 4Xsound

Бренд: Leadtek Страницы: 29

Бренд: Power Acoustik Страницы: 9

Бренд: Edimax Страницы: 9

Бренд: Elitegroup Computer Systems Страницы: 16

Бренд: v.link Страницы: 21

Бренд: Planet Страницы: 2

Бренд: Planet Страницы: 14

Бренд: Seagate Страницы: 2

PCI EXPRESS-AGP

Бренд: SPARKLE Страницы: 41

Бренд: BT Страницы: 35

9500GT 512MB DVI

Бренд: Gainward Страницы: 2

210 1024MB DDR2

Бренд: Gainward Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды