www.modellmarkt24.ch
4
Items needed for completion:
✓
Masking tape
✓
Hobby knife with #11 blades
✓
Thin and medium CA. We highly recommend Mercury M5T thin and M100XF
medium formulas as well as the Mercury glue tips
✓
30 minute epoxy. Pacer Z-Poxy is a long time favorite
✓
Goop Silicon glue
✓
Blue and Red Loctite
✓
Electric drill with an assortment of small drill bits
✓
Small flat head and Phillips head screw drivers
✓
Standard and needle nose pliers
✓
Side cutters
✓
Metric ball driver or allen key set
✓
Sanding block and sandpaper
✓
5 x MKS HV-777A, HBL-380 X8 or comparable servos
✓
Extreme Flight Socket Head Servo Screws
✓
2
x 1.5”
Extreme Flight aluminum servo arms for the ailerons
✓
2 x 2”
Extreme Flight aluminum arms for the elevators
✓
1 x 4
”
Extreme Flight double aluminum arm for pull-pull rudder.
✓
1 1.5" Extreme Flight aluminum servo arm if using push-pull rudder
✓
2 x Extreme Flight
6”
20 awg Servo Extensions.
✓
2 x Extreme Flight 12
”
20 awg Servo Extensions.
✓
1 24" Extreme Flight 20 awg Servo Extension.
✓
2 x 36
”
Extreme Flight 20awg Servo Extensions. If you need to remove the stabs for
transport use 48" extensions.
✓
1 36" Extreme Flight 20 awg servo extensions if using rear mounted rudder servo
and push-pull assembly
✓
Extreme Flight Servo Safety Clips
✓
4.5
” Spinner
✓
Xpwr 60 Brushless Outrunner
✓
Castle Creations EDGE 160HV ESC running Firmware v4.22
✓
Series wiring harness to hook up 2 batteries in series with your choice of connectors
✓
Blazing Star XXL Standoff Set
✓
Xoar 24X10 or 24X12 PJN Electric Prop
✓
High quality High C rating 12S Lipo battereis 5000-8000 mah capacity
✓
Heavy duty Velcro and Velcro straps to secure batteries.
✓
Optional-Extreme Flight Anodized Washer sets to add some bling!
www.modellmarkt24.ch
