3D
Aeroventures
N�v�r S�o� E�p�o�i�g� N�v�r S�o� Q�e�t�o�i�g� N�v�r S�o� P�a�i�g
- 3� -
Step-by-Step Build Guide (cont’d)
Step 7.2 Install Motor, ESC, and Receiver
7.2.1 Mount the motor to the Motor Pod
using the mounting screws that
came with the motor.
7.2.2 Install the ESC. Use velcro with
adhesive backing to attach the ESC
to either the inside wall of the
fuselage or to the ceiling of the
canopy.
7.1.4 Cut the aileron control rods to the proper length and bend a Z-bend into
each end. Install the control rods into the servo control arms and the
aileron control horns.
7.1.3 Using the mounting screws that came with your servos, mount the
aileron servos in the aileron servo trays.
Note: It is recommended to test and center the servos prior to installation.
