3D
Aeroventures
N�v�r S�o� E�p�o�i�g� N�v�r S�o� Q�e�t�o�i�g� N�v�r S�o� P�a�i�g
- 2� -
Step-by-Step Build Guide (cont’d)
3.1.5 Repeat the previous 4 steps for the left wing using parts Wing L1, Wing L2.
Aileron L1, Aileron L2, and another Aileron Servo Tray.
3.1.6 Now that both ailerons are installed, glue the Right Wing and Left Wing
together with CA glue, using the 3mm diameter x 10mm long dowel pins
to align the wings.
3.1.4 Use a sharp hobby knife to clear out any stringing or debri from the servo
opening and glue the PLA Aileron Servo Tray in place with CA glue. You may
want to drill out the servo mounting holes with a 1.2mm drill bit prior to
gluing.
