12
3D SYSTEMS, INC
.
10
LIFTING EQUIPMENT
Before handling the equipment, verify the following:
•
Use a forklift with a load capacity of at least 1500 kg (3307 lbs).
•
Forks should be at min. 1.5 meters long (59.05 in.).
•
Make certain all lifting equipment will fit through all doorways leading to the installation room.
•
Standard moving and handling tools may be required (pallet truck, cargo trolley...).
•
Staff insured and authorized to use the lifting equipment is necessary. 3D Systems-certified Customer Support Engineer are
not qualified to use such equipment.
The equipment is delivered with steel beams (I profile), that must be removed during installation. The main cabinet will stand
on adjustable feet.
11
TOOLS
Tools that will be used in the presence of metal powders must be non-sparking, non-magnetic hand tools which are
manufactured from Aluminum or special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. These are the only tools
that are safe to use in EX zones where hazardous, flammable or combustible materials are present.
The following items are required:
•
All electric tools must be for minimum ATEX zone 22 (Europe), or Class II, Division II (USA)
•
Work benches must be grounded (antistatic mats)
•
Brushes and brooms must have natural fibers
•
Only use aluminum dust pan
12
PERSONAL PROTECTIVE EQUIPMENT
Personal Protective Equipment (PPE), that is required when working with metal powders is as follows:
•
Disposable masks and respirators - FFP3 class (EN149:2001), N99 or better (Occupational Safety and Health
Administration standard)
•
Eye protection - Close fitting safety goggles or face mask.
•
Nitrile gloves
•
Head cover
•
Shoes - antistatic, conductive soles, safety toe
•
Antistatic or conductive outer garments (coveralls)
•
Hearing protection depending on the dB level.
All of the items listed above must be acquired and available for each employee before the machine and materials arrive on site.
All PPE must remain on site. Storage of the PPE must be made available.