3D Systems Geomagic Capture Скачать руководство пользователя страница 24

Страница: 24 / 25

3D Systems, Inc.

ADVANCED SETTINGS

Device Status

Manages device connection status. All listed devices can be connected or disconnected by selecting or clearing the check box

next to the name of each device.

Network Configuration

Configures network settings.

Note: To configure the network settings, you need to select the desired scanner first in the Device Status.

Auto Configure

- Automatically reconfigures the network for all checked scanners.

IP Address

– Used to manually set a static IP address.

Subnet Mask / Default Gateway

– Used to manually set a subnet mask and a default gateway.

For more information on setting up your Geomagic Capture Series 3D scanner and scanner connections, see

Network

Configuration

Use DHCP

– Uses the DHCP IP protocol instead of static IP addresses.

Apply

– Applies all changes.

Update Device Firmwares

Updates device firmwares via file. For more information, see

Updating Device Firmwares

Содержание Geomagic Capture

























Результаты поиска

Содержание Geomagic Capture

Отзывы:

3D Systems Geomagic Capture, Руководство пользователя, Страница: 24 / 25

Результаты поиска

Содержание Geomagic Capture

Отзывы: