3D Systems Geomagic Capture Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 25

3D Systems Geomagic Capture Скачать руководство пользователя страница 12

3D Systems, Inc.

10

e) In the Local Area Connection Properties dialog, select

Internet Protocol Version 4 (TCP/IPv4)

, and then click

Properties

.

f) Make sure that all the addresses are configured properly.

When you use a network hub to connect multiple devices at a common connection

point in a network, the following settings are recommended for the network

adapter:

g) Finally, click

OK

to accept the changes.

Updating Device Firmwares

Geomagic Capture includes the latest device firmware for the Geomagic Capture Series 3D scanner. If the scanner firmware is

incompatible, a message will appear when the application is started up. You can simply update the device firmware by clicking

OK

in

the message.

Note: If there is an issue with updating the device firmware, you must use the manual device firmware update to control

scanners.
a) Go to Settings by clicking

Settings

to manually update the firmware.

b) Click

Update...

.

c) Windows Explorer will be initiated. Find a

upgrade.dat file

at:

•

For Geomagic Capture for SolidWorks / Geomagic Capture for SpaceClaim / Geomagic Design Direct / Geomagic Con-

trol / Geomagic Studio / Geomagic Wrap:

~<Product Installation Path>\capture\hardware\Geomagic Capture\driver\Scanner

Modules\Gocator

•

For Geomagic Design X / Geomagic Verify / Geomagic XOS:

~<Product Installation Path>\bin\GeomagicCapture\bin\driver\

Scanner Modules\Gocator

d) Select the file and click

Open

. The update will take a couple of minutes to complete.

«
...
10
11
12
13
14
...
»

Содержание Geomagic Capture


























Отзывы:

Нет отзывов