10
WALL MOUNT INSTALLATION
•
Install four anchors into the marked hole locations; the anchors should be flush
to the wall.
•
Install two screws to the two top anchors. Leave a little gap between the anchor
and screw to install station.
Required Tools & Fasteners (not supplied):
Phillips Screwdriver; Four (4) 6mm or 1/4” screws Anchors (anchors depend on
the wall type).
Anchors should be
flush to the wall
•
Install station’s two upper keyholes (backside of station) onto the two upper screws.
•
Turn the three thumbscrews counterclockwise to unlock the front cover and open cover.
Keyholes
Thumbscrews
•
Align the stations’s two bottom holes to the two bottom pilot holes in wall and install two screws. Tighten
the upper and lower screws securely.
Install two screws
