3D Sublimation Solutions 3D SMARTone Phone CaseDecoration System, Инструкция по установке и эксплуатации

Страница: 10 / 25

3D SMARTone
INSTALLATION AND OPERATION
10
•
The screen will show the process timer
counting down
•
The dial will show the vacuum level.
NB: the vacuum level will pulse in the initial stages of
the cycle
•
When complete, a buzzer will sound and the
drawer can be opened.
•
Remove the film and unclip the part.
•
SMARTone part removal tool is recommended
•
The part will cool quickly and can then be
used/packaged for sale straightaway.
•
The SMARTone is ready for its next cycle.
•
Either load the next part or close the drawer
to keep warm. The keep warm cycle starts 2
minutes after the drawer is closed if the start
button has not been pressed.