There is poor response from the Interactive Remote Control
Possible causes and remedies:
1.
Check that nothing is blocking the IR receiver at the front of the 3D Perception projector.
2.
Make sure the remote is pointed towards the screen.
3.
Make sure there is no more than 10m/33ft in distance to the projector.
4.
Batteries might be low. Change batteries in the remote control.
5.
Electromagnetic or optic noise may influence the remote control. Turn off sharp fluorescent
tubes, mobile phones etc that are near the projector.
No Image Appears
Possible causes and remedies:
1.
The 3D Perception projector has not been switched on. Check the ON/OFF switch at the
back.
2.
For Notebooks: The external RGB port may need to be manually activated. Please consult
the notebook-operating manual for how to operate.
9.1 Further
assistance
Further assistance can be found in the comprehensive on-line ‘Help’ feature in the section
entitled ‘Troubleshooting’.
You are also invited to visit our web site
www.3d-perception.com
27
