6.3
Using the touch panel on the C
OMPACT
V
IEW
X10 projector
The touch panel gives you direct access to the most important functions of the
C
OMPACT
V
IEW
X10
projector. It is very handy to use when the remote control has low batteries, or you simply
have forgotten to bring it with you. Remember, these controls are also available from the
software. The key functions are as follows:
Source
The
C
OMPACT
V
IEW
X10
projector has direct keys for input
selection, PC being the norm.
Brightness
The Brightness key is used to control the brightness in
data and video image.
Contrast
The Contrast key is used to control the contrast in data
and video image.
Figure 9: The keys on the touch
panel on the
C
OMPACT
V
IEW
X10
Stand by
The stand by key will set the
C
OMPACT
V
IEW
X10
projector in stand by mode. The lamp
will turn off, and the fans will run for a little
while cooling the projector before stopping.
To return to normal mode, press the Stand
by key once more, or press the Menu key
on the remote control.
Automatic set-up
The automatic set-up key will set up the
projector with optimal settings for the
connected source. If you want to do manual
adjustments you can do this by using the
menus (see section 7).
NOTE!
Some features of the screen menu system can only be accessed via the remote control.
15
