2
Assembly
Install the Legs
The front leg is longer than the rear leg. See the drawing above.
1.
Place the bike on a flat surface.
2. Attach each leg to the bike with 2 bolts, 2 washers and 2 nuts as shown in the diagram.
3. Tighten all 4 nuts by hand.
4.
Make sure all 4 feet sit flat on the surface. Rotate the feet if necessary.
5. Finish tightening the nuts using the provided wrench.
Rear Leg
Front Leg
Bolts
Nut
Nut
Washer
Washer
Bike
