3D-Inc TPD-HD330NRW Скачать руководство пользователя страница 3

Страница: 3 / 43

1. 1 Important Safety Instruction

• Read these instructions.

• Pay attention on all the warnings.

• Follow all instructions.

• Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

• Do not dissemble or insert foreign objects.

• Do not install near any heat sources such as radiation, beat registers, stoves, or other apparatus.

(Including amplifiers) that produce heat.

• Do not aim the camera at the sun or any other strong light source.

• Do not install the camera in intermittent lighting environments.

• Only use attachments/accessories specified by the manufacturer.

• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with

the apparatus. When a cart is used, use caution when moving the cart/apparatus combination

to avoid injury from tip-over.

• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

• Installation should be done only by qualified personnel and conform to all local codes.

• Installation should be done in a place strong enough to hold it.

• Use only installation methods and materials capable of supporting four times the maximum specified load.

• It is designed for indoor use only and it must not be installed where exposed to rain and moisture

without additional outdoor housing and bracket.

• To prevent damage from water leakage when installing a mount outdoors on a roof or wall,

apply sealant around the bolt holes between the mount and mounting surface.

• These instructions are for use by qualified service personnel only. To reduce the risk of electric shock

do not perform any servicing other that contained in the operating instructions unless you are qualified

to do so.

• Only use replacement parts recommended by manufacturer.

ad these instructions.

1. PRECAUTIONS

Содержание TPD-HD330NRW












































Результаты поиска

Содержание TPD-HD330NRW

Отзывы:

Бренды по названию

Популярные бренды

3D-Inc TPD-HD330NRW, Инструкция по установке и эксплуатации

Результаты поиска

Содержание TPD-HD330NRW

Отзывы:

Бренды по названию

Популярные бренды