Pannoramic MIDI 1.15 User’s Guide
5 Troubleshooting and Maintenance
Figure 71 – Removing the lamp module
5.
Carefully retrieve the new lamp module from its transporting container. Hold the lamp
module only by its ceramic part.
6.
Insert the new lamp module. Make sure that the groove (
1
) in the contact surface of the
lamp captures the corresponding pin of the lamp mount (see
Figure 72
).
7.
xd
Figure 72 – Inserting the lamp module
Caution!
Incorrect handling may considerably reduce the lamp
module’s useful
life. Hold it by the ceramic part in all cases! Never touch the lamp’s
glass surface or the inside surface of the reflector. Skin oil is harmful to
these parts.
8.
Re-establish plug-in connection.
9.
Tighten pressure bolt again with the lever.
2012. March 13.
3DHISTECH Ltd.
120
(
131
)