3Com Switch 8807, Справочник по командам

Страница: 266 / 1099

264 C
HAPTER
17: Q
O
S C
OMMANDS
undo traffic-limit inbound ip-group { acl-number | acl-name } { rule rule
link-group { acl-number | acl-name } [ rule rule ] | link-group { acl-number |
acl-name } rule rule }
Command format which only applies link group ACL
traffic-limit inbound link-group { acl-number | acl-name } [ rule rule [
system-index index ] ] [ tc-index index ] cir cbs ebs [ pir ] [ conform { {
remark-cos | remark-drop-priority }* | remark-policed-service } ] [ exceed {
forward | drop } ]
undo traffic-limit inbound link-group { acl-number | acl-name } [ rule rule ]
View
Ethernet port view, port group view
Parameter
inbound : Sets traffic limitation for the inbound packets at the port.
ip-group { acl-number | acl-name }: Activates IP ACLs, including basic and
advanced ACLs. acl-number : Sequence number of ACL, ranging from 2000 to
3999. acl-name : Name of the ACL, which must be a character string starting with
an English letter (a-z or A-Z), and without any space in it.
link-group { acl-number | acl-name }: Activates Layer 2 ACLs. acl-number :
Sequence number of ACL, ranging from 4000 to 4999. acl-name : Name of ACL,
which must be a character string started with an English letter (a-z or A-Z), and
without any space in it.
rule rule : Specifies the subitem of an active ACL, ranging from 0 to 127; if not
specified, all subitems of ACL will be activated.
system-index index here is the system index for an ACL rule. When delivering a
rule, the system assigns a globally unique index to it, for convenience of later
retrieval. You can also assign a system index for it when delivering an ACL rule
with this command, but this value may change while the system is running.
Generally you are not recommended to manually assign a system index.
tc-index index : Index value of traffic conditioner, ranging from 0 to 12288. If you
configured the same index value to different traffic rules during traffic policy
configuration, then the sum of these traffics is restricted by the configured traffic
policy parameter. For example, configure cir of the traffic that matches rule 1 to 10
kbps, and that of the rule 2 to 10 kbps too; and both of the rules have the same
index value of traffic conditioner, then the sum of the average rates of rule 1 and
rule 2 is restricted to 10 kbps.
n
■
The parameters of traffic policy must be the same if you configure the same
tc-index for different traffic; otherwise the system prompts you for the wrong
configuration; when the tc-index is 0, it means that the system will select an
index value automatically.