3Com Switch 8807, Справочник по командам

Страница: 1019 / 1099

Information Center Configuration Commands 1017
default : All the modules.
log : Log information.
trap : Trap information.
all : Clears all the information filtering configuration on the channelnum channel
except the default one.
debugging : Debugging information.
level : Level.
severity : Information level, do not output information below this level.
Table 146 gives detailed severity information:
By default, the information level of each channel is as follows:
VTY VTY (virtual type terminal) module
Table 146 Severity levels defined in the information center
Severity Value Description
emergencies 1 Emergent errors
alerts 2 Errors you must correct immediately
critical 3 Critical errors
errors 4 Errors requiring your attention but not critical
warnings 5 Warning, an error may occur
notifications 6 Information requiring your attention
informational 7 General prompt information
debugging 8 Debugging information
Table 147 Default information level of each channel
channel
Log information
level Trap information
level Debugging
information level
Console warning debugging debugging
Terminal warning debugging debugging
Log host informational debugging debugging
Trapbuffer informational warning debugging
Logbuffer warning debugging debugging
SNMPagent debugging warning debugging
Logfile warning debugging debugging
Channel7 debugging debugging debugging
Channel8 debugging debugging debugging
Channel9 debugging debugging debugging
Table 145 The module name field
Module
name Description