7
Table 4
System View
<4500>
sys
reset radius statistics
Clear the statistic information related to the RADIUS protocol
reset recycle-bin
Delete contents of recycle bin
reset saved-configuration
Delete configuration files
Administration -> Initialize
reset stop-accounting-buffer
Delete the stopping accounting requests from the buffer
according to the specified RADIUS server name
reset stp
Clear statistics for STP
reset tcp statistics
Clear TCP statistics information
reset trapbuffer
Reset information in trap buffer
reset udp statistics
Clear UDP statistics information
rmdir
Delete an existing directory
save
Save current configuration
Save Configuration
schedule reboot at
Schedule a reboot of the Switch at specified time
schedule reboot delay
Configure the Switch to be rebooted after a specified time
delay
send
Send information to other user terminal interface
startup bootrom-access
enable
Enable BOOTROM access
startup saved-configuration
Configure the configuration file used for starting the system
Administration -> Restore
Configuration
system-view
Enter the system view (See
Table 4, “System View,” on
page 7
)
telnet
Establish one Telnet connection
terminal debugging
Configure to display the debugging information on the
terminal
terminal logging
Enable terminal log information display
terminal monitor
Enable the log debugging/log/trap on the terminal monitor
terminal trapping
Enable terminal trap information display
tftp get
Download a file from the specified directory of the TFTP
server
Administration -> Restore
Configuration
tftp put
Upload a file from the Switch to the specified directory on the
TFTP server
Administration -> Backup
Configuration
undelete
Recover a deleted file
undo
Cancel the current setting
xmodem
Establish an xmodem connnection
Command
Description
Web Command
acl number
Define ACL identified by a number or a name, and then enter
the corresponding ACL view (See
Table , “
[4500]rip
,” on
page 17
)
Device -> ACL
Security-> Authorized IP
am enable
Enable the access management function
am trap enable
Enable the access management trap
arp check enable
Enable the checking of ARP entries
arp static
Configure the static ARP mapping entries in an ARP mapping
table
arp timer aging
Configure the dynamic ARP aging timer
change unit-id
Change the ID of the Switch
change self-unit
Change the ID of the Switch
command-privilege level
Specify the command level
copy configuration
Copy source port configuration to destination port
cut connection
Disconnect a user or a category of users by force
Command
Description
Web Command