10
radius scheme
Specify RADIUS configuration information and enter the
RADIUS view (See
Table 11, “RADIUS Server Group View,” on
page 13
)
remote-ping
Specify the remote-ping test class
remote-ping-agent enable
Enable a remote-ping client
return
Return to user view from any view other than user view
rip
Enable RIP and enter RIP view (See
Table 17, “RIP View,” on
page 17
)
rmon alarm
Add an entry to the alarm table
rmon event
Add an entry to the event table
rmon prialarm
Add an entry to the extended RMON alarm table
route-policy
Specify a route policy and enter route policy view (See
Table 16, “Route Policy View,” on page 16
)
rsa local-key-pair create
Create local RSA host key pair and server key pair
rsa local-key-pair destroy
Remove all RSA key pairs at the server, including host key pair
and Server key pair
rsa peer-public-key
Enter the public key view (See
Table 8, “Public Key Edit
View,” on page 12
)
set unit “[name]”
Set the unit number name. “[name]”= text string
sftp server enable
Enable SFTP Server
snmp-agent community
Configure community access name and access to SNMP
Administration -> SNMP ->
Community String
snmp-agent group
Configure an SNMP group
Administration -> SNMP ->
Group
snmp-agent local-engineid
Configure a name for a local or remote SNMP engine on the
Switch
snmp-agent mib-view
Create or update the view information
snmp-agent packet max-size
Specify the size of an SNMP packet
snmp-agent sys-info
Configure system information of running SNMP
snmp-agent target-host
Configure destination of SNMP notification
Administration -> SNMP ->
Traps
snmp-agent trap enable
Enable/disable the device to send Trap messages
Administration -> SNMP ->
Traps
snmp-agent trap life
Configure the timeout of Trap packets
snmp-agent trap queue-size
Configure the information queue length of Trap packets sent
to the destination host
snmp-agent trap source
Configure the source address for sending Trap packets
snmp-agent usm-user
Configure users in an SNMP group
Administration -> SNMP ->
Users
ssh2
Establish one telnet connection
ssh client (SSH server IP
address or name) assign rsa-
key (key name)
Assign the SSH client an RSA Key
ssh client first-time enable
Set SSH client attribute of authenticating user for the first
time access
ssh server authentication-
retries (number of retries,
1-5)
Define SSH authentication retry times value
ssh server timeout (value in
seconds, 1-120)
Define timeout value for SSH registration authentication
ssh user (username) service-
type sftp
Set SSH User service types, either stelnet, sft, or all. All is both
stelnet and sftp.
ssh user (sername) assign
rsakey (key name)
Associate an existing public key with a designated user
Command
Description
Web Command