3Com Switch 4210 9-Port, Руководство по настройке

Страница: 454 / 567

452 C
HAPTER
40: I
NFORMATION
C
ENTER
■
If the threshold is set to 1, only information with the severity being
emergencies will be output;
■
If the threshold is set to 8, information of all severities will be output.
Ten channels and six output directions of system information
The system supports six information output directions, including the Console,
Monitor terminal (monitor), logbuffer, loghost, trapbuffer and SNMP.
The system supports ten channels. The channels 0 through 5 have their default
channel names and are associated with six output directions by default. Both the
channel names and the associations between the channels and output directions
can be changed through commands.
n
Configurations for the six output directions function independently and take effect
only after the information center is enabled.
Table 339 Information channels and output directions
Information channel
number
Default channel name Default output direction
0 console Console (Receives log, trap
and debugging information)
1 monitor Monitor terminal (Receives
log, trap and debugging
information, facilitating
remote maintenance)
2 loghost Log host (Receives log, trap
and debugging information
and information will be stored
in files for future retrieval.)
3 trapbuffer Trap buffer (Receives trap
information, a buffer inside
the device for recording
information.)
4 logbuffer Log buffer (Receives log
information, a buffer inside
the device for recording
information.)
5 snmpagent SNMP NMS (Receives trap
information)
6 channel6 Not specified (Receives log,
trap, and debugging
information)
7 channel7 Not specified (Receives log,
trap, and debugging
information)
8 channel8 Not specified (Receives log,
trap, and debugging
information)
9 channel9 Not specified (Receives log,
trap, and debugging
information)