3Com Switch 4210 9-Port, Руководство по настройке

Страница: 45 / 567

Logging in through Telnet 43
When the authentication mode is password, the command level available to users
logging into the user interface is determined by the
user privilege level
command.
Configuration Example Network requirements
The current user logs in through the Console port and the user level is set to the
administrator level (level 3). Perform the following configuration for users logging
into VTY 0 using Telnet.
1 Authenticate users using the local password.
2 Set the local password to 123456 (in plain text).
■
Commands of level 2 are available to the users.
■
Telnet protocol is supported.
■
The screen can contain up to 30 lines.
■
The history command buffer can contain up to 20 commands.
■
The timeout time of VTY 0 is 6 minutes.
Network diagram
Figure 10 Network diagram for Telnet configuration (with the authentication mode being
password)
Configuration procedure
# Enter system view.
<4210> system-view
Set the timeout time of the
user interface idle-timeout minutes [ seconds ] Optional
The default timeout time
of a user interface is 10
minutes.
With the timeout time
being 10 minutes, the
connection to a user
interface is terminated if
no operation is
performed in the user
interface within 10
minutes.
You can use the
idle-timeout 0
command to disable the
timeout function.
Table 21 Telnet configuration with the authentication mode being password
Operation Command Description
RS-232 port
Configuration cable
Console port