3Com SuperStack 3 4950 Скачать руководство пользователя страница 15

Страница: 15 / 67

Switch 4950 — Front View Detail

LEDs

Table 5

lists LEDs visible on the front of the Switch, and how to read their

status according to color. For information on using the LEDs for problem
solving, see

“Checking for Correct Operation of LEDs”

page 23

Table 5

LED behavior

LED

Color

Indicates

Port Status LEDs

Packet

Yellow

Packets are being transmitted/received on the port.

Off

No packets are being transmitted/received on the port.

Status

Green

A high speed (1000 Mbps) link is present, and the port
is enabled.

Green flashing

A high speed (1000 Mbps) link is present, but the port
is disabled.

Yellow

A low speed (10/100 Mbps) link is present, and the
port is enabled.

Yellow flashing

A low speed (10/100 Mbps) link is present, but the port
is disabled.

Off

No link is present.

Module Status LEDs

Green

The Module is installed and supported. The Link Status
has been determined for a single port Module.

Yellow

The Module is installed and supported. The Module
has multi-ports or there is no Link for a single port
Module.

Yellow flashing

The Module is installed but not supported. Note that
the 4950 unit will continue to operate normally.

Off

The Module is not installed.

Unit LEDs

1–4

Green

When the Switch can form a stack with other Switch
4950 units the LED indicates the position of the unit in
the stack and that a link is present.

Off

The Switch is stand-alone or the link is not present.

Power/Self Test LED

Green

The Switch is powered-up and operating normally.

Green flashing

The Switch is either downloading software or is
initializing (which includes running a Power On Self
Test).

Yellow

The Switch has failed its Power On Self Test.

Off

The Switch is not receiving power.

Содержание SuperStack 3 4950




































































Результаты поиска

Содержание SuperStack 3 4950

Отзывы:

Бренды по названию

Популярные бренды

3Com SuperStack 3 4950, Руководство по началу работы

Результаты поиска

Содержание SuperStack 3 4950

Отзывы:

Бренды по названию

Популярные бренды