3Com REMOTE ACCESS SYSTEM 1500, Руководство по управлению

Страница: 86 / 300

84 C
HAPTER
6: C
ONFIGURING
N
ETWORK
D
IAL
-I
N
Configuring CLID
Callback
For most CLID-callback setups, three general steps must be completed to
prepare the RAS 1500:
Step One: Add a CLID user.
Step Two: Configure the user CLID-callback settings.
Step Three: Configure CLID security.
Each of these steps is shown in detail below. In some cases, not all of the
steps are necessary. See the “Case Studies” section for more specific
examples.
Step One:
Add a CLID User
To add a new CLID callback user, use the following command:
add user [name] type clid_callback,[network and/or login]
For example,
add user schmidt type clid_callback,network
When issuing the
add
command for a clid_callback user, the
type
parameter must also include either “network” or “login” or both.
To modify an existing user to be a CLID user, use the following command:
set user [name] type clid_callback,[network and/or login]
For example,
set user johnson type clid_callback,network
When issuing the set command for a clid_callback user, the type
parameter must also include either “network” or “login” or both.
Step Two:
Configure the User
CLID-callback Settings
To configure a user for CLID callback, perform the following steps: