3Com PC Card, Руководство пользователя

Страница: 38 / 66

34 C
HAPTER
5: U
SING THE
M
ODEM
S14 Bit-mapped. Storable. Bit 1. Echo command characters (E CMD)
■
0 = No echo
■
1 = Echo
Bits 2 and 4 generate result codes (Q CMD)
■
0 = Enable result codes
■
1 = No result codes
■
2 = Result codes enabled only when originate mode in effect
Bit 3. Verbose/numeric result codes (V CMD)
■
0 = Numeric result codes
■
1 = Verbose result codes
Bit 5. Tone / Dial (P and T CMD)
■
0 = Tone dialing (T CMD) toner
■
1 = Pulse dialing (P CMD)
Bit 7. Current operating mode.
■
0 = Answer mode
■
1 = Originate mode
S16 Test Status (Bit-mapped). Nonstorable. Bit 0 is Analog loopback (&T1 CMD)
■
0 = No Analog loopback
■
1 = Analog loopback active
Bit 2. Digital loopback (&T3 CMD)
■
0 = No Local digital loopback
■
1 = Local digital loopback active
Bit 3. Status of Local digital loopback initiated by remote mode
■
0 = No Local digital loopback
■
1 = Local digital loopback initiated by remote modem active
Bit 4. Remote digital loopback (&T6 CMD)
0 = No Remote digital loopback active
1 = Remote digital loopback initiated and granted by remote
Bit 5. Remote digital loopback with self test (&T7 CMD)
■
0 = No Remote digital loopback active
■
1 = Remote digital loopback with self test initiated and granted by remote
Bit 6. Analog loopback with self test (&T8 command)
■
0 = No Analog loopback
■
1 = Analog loopback with self test active
S18 Test Timer. 0 = Infinite test time. Any other value specifies the duration of the test.
Value: 0 - 255. Default = 0. Storable.
S19 Bit-mapped. Nonstorable.
Bit 0
■
0 Mu-Law codec
■
1 A-Law codec
Bits 1-2 are Auto Rob bit signalling mode detection
■
00 Enable.
■
01 Disable (64K).
■
10 Enable (56K).