3-11
Figure 3-9
AUX cable
Connecting the AUX cable
Follow these steps to connect the AUX cable.
Step 1: Plug the RJ-45 connector of the cable into the AUX port on the main control board.
Step 2: Plug the DB-25 or DB-9 connector into the serial port on the analog modem.
When using the AUX interface for remote configuration or dial backup, you need to connect the local
modem to the remote modem through PSTN and then to the remote device. For the configuration
procedures, refer to
MSR 20/30/50 Series Routers User Manual.
Interface Card Module
The MSR 50 Series Routers are available with various types of interface card modules. For detailed
information, refer to
MSR 20/30/50 Series Routers Interface Card and Interface Module Manual
.
Installing/Removing Slide Rail
MSR 50 Series Slide Rail
SIC slide rail
Figure 3-10
SIC slide rail
