3-6
C
HAPTER
3: C
ABLING
S
WITCH
3900 P
ORTS
To cable the Console port:
1
Attach the female DB-9 cable connector to the
Console port’s male connector and tighten the
retaining screws.
2
Attach the other end of the DB-9 cable to your
terminal.
Figure 3-3 shows the cabling of the Console port.
You can also access the system remotely through any
Ethernet port using telnet. See the
SuperStack II
Switch 3900 and 9300 Administration Guide
.
To use the Administration Console to configure the
system for management access through the Console
port, see Chapter 5.
Figure 3-3
Cabling the Console Port
DB-9 connector
1000 Base SX
Pckt
Stat
Console
Serial cable
