5-3
Table 5-1
Set serial port parameters
Item
Value
Bits per second
9600 bps (default)
Data bits
8
Parity None
Stop bits
1
Flow control
None
In case SecureCRT is used to configure the F5000-A5 firewall,
flow control
of the serial port must be
set to
Xon/Xoff
; otherwise, the terminal screen displays nothing or only illegible characters.
To use the default settings, click
Restore Defaults
.
Step4
Click
OK
after setting the serial port parameters to enter the HyperTerminal window, as shown in Figure
5-4.
Figure 5-4
HyperTerminal window
Step5
Set HyperTerminal properties. In the HyperTerminal window, select
File
>
Properties
from the menu,
and select the
Settings
tab to enter the properties setting dialog box, as shown in Figure 5-5. Select
VT100
or
Auto detect
, and click
OK
to return to the HyperTerminal window.